Jump to content
Cesbo Community
  • Announcements

    • RadioSintetica

      News!   12/10/17

      If you have any questions related to installation and purchase, please check our documentation https://cesbo.com/en/astra/docs/ and terms of service https://cesbo.com/en/terms/
      Also, we have an official Telegram chat: https://t.me/cesbo_en  you can ask any questions or share your experience with colleagues Если у вас возникли вопросы по установке и покупке, ознакомьтесь пожалуйста с документацией по адресу https://cesbo.com/ru/astra/docs/ и условиями использования https://cesbo.com/ru/terms/
      Так же, обращаю внимание, что у нас есть официальный Телеграмм чат: https://t.me/cesbo_ru в котором можно задать вопросы - или поделиться своим опытом с коллегами
Sign in to follow this  
BORSCH°

PBI 1701PM-04C восстановление

Recommended Posts

Добрый день. После неудачной прошивки PBI 1701PM-04C прошивкой http://data.nag.ru/PBI/Software/1701xx/17xx0037.rar пробовал восстановить через Serial кабель с помощью telnet и ftp по инструкции https://shop.nag.ru/article/vostanovlenie-dmm-1701pm-04s2 , предварительно сделав бэкап pbiinit.db файла (переименовал его), а файла pbiinit-journal.db не было. После reboot оборудование всё равно не заработало, тогда я решил через ftp закинуть прошивку от http://data.nag.ru/PBI/Software/1701IM/17xx004a.rar и выполнил в терминале upgrade - после чего при подключении оборудование не работает, невозможно задать ifconfig адрес сетевой карте и по Serial к терминалу не работает ни одна консольная команда и регулярно раз в 1-2 секунды появляются только сообщения вида:

K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c

Вот полная портянка неработающего PBI:

Board: STx7105-PDK  [32-bit mode]


U-Boot 1.3.1 (Jun  2 2011 - 18:42:20) - stm23_0051

DRAM:  256 MiB
NOR:    64 MiB
NAND:  No NAND device found!!!
  0 KiB
SPI:  ERROR: Unknown SPI Device detected, status = 0xff
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
## Booting image at a0060000 ...
   Image Name:   Linux 2.6
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    2224877 Bytes =   2.1 MiB
   Load Address: 80800000
   Entry Point:  80801000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel root=/dev/mtdblock2 rootfstype=jffs2 rw init=/linuxrc noinitrd console=ttyAS0,115200 mem=256M bigphysarea=2000 - 0x00000000 - 0 ...

Linux version 2.6.23.17_stm23_A26-pdk7105 (root@localhost.localdomain) (gcc version 4.2.4 (snapshot) (STMicroelectronics/Linux Base 4.2.4-55)) #1 PREEMPT Fri Mar 30 11:36:41 CST 2012
Using mem= to increase the size of kernel memory is not allowed.
  Recompile the kernel with the correct value for CONFIG_MEMORY_SIZE.
Booting machvec: pdk7105
Node 0: start_pfn = 0x40000, low = 0x48000
Zone PFN ranges:
  Normal     262144 ->   294912
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:   262144 ->   294912
STMicroelectronics PDK7105-SDK board initialisation
STx7105 version 4.x
Built 1 zonelists in Zone order.  Total pages: 32512
Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 rw init=/linuxrc noinitrd console=ttyAS0,115200 mem=256M bigphysarea=2000
bpa2: partition 'bigphysarea' created at 0x40d0b000, size 8000 kB (0x007d0000 B)
PID hash table entries: 512 (order: 9, 2048 bytes)
Using tmu for system timer
Using 25.000 MHz high precision timer.
Console: colour dummy device 80x25
console [ttyAS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 109568k/131072k available (3212k kernel code, 596k data, 132k init)
PVR=04909200 CVR=60880000 PRR=00009e40
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STx7105
NET: Registered protocol family 16
Configuring FLASH for boot-from-NOR
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: SuperH clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NTFS driver 2.1.28 [Flags: R/O].
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
JFS: nTxBlock = 856, nTxLock = 6851
io scheduler noop registered
io scheduler anticipatory registered (default)
lcddriver loaded **********
STMicroelectronics ASC driver initialized
stasc.0: ttyAS0 at MMIO 0xfd031000 (irq = 122) is a stasc
stasc.1: ttyAS1 at MMIO 0xfd030000 (irq = 123) is a stasc
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
        platform registration... <7>done!
        GMAC - user ID: 0x10, Synopsys ID: 0x33
        no valid MAC address; please, set using ifconfig or nwhwconfig!
        eth0 - (dev. name: stmmaceth - id: 0, IRQ #134
        IO base addr: 0xfd110000)
STMMAC MII Bus: probed
eth0: PHY ID 00008201 at 1 IRQ -1 (0:01) active
SMSC LAN83C185: Registered new driver
SMSC LAN8187: Registered new driver
SMSC LAN8700: Registered new driver
SMSC LAN911x Internal PHY: Registered new driver
SMSC LAN8710/LAN8720: Registered new driver
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver usb8xxx
scsi0 : sata_stm
ata1: SATA max UDMA/133 cmd 0xfe209000 ctl 0xfe209820 bmdma 0x00000000 irq 72
ata1: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 08000000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Using physmap partition information
Creating 3 MTD partitions on "physmap-flash":
0x00000000-0x00040000 : "Boot firmware"
0x00060000-0x00460000 : "Kernel"
0x00500000-0x04000000 : "Root FS"
stm-ehci stm-ehci.0: st-ehci
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: stm-ohci
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
stm-ehci stm-ehci.1: st-ehci
stm-ehci stm-ehci.1: new USB bus registered, assigned bus number 3
stm-ehci stm-ehci.1: irq 143, io mem 0xfeaffe00
stm-ehci stm-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
stm-ohci stm-ohci.1: stm-ohci
stm-ohci stm-ohci.1: new USB bus registered, assigned bus number 4
stm-ohci stm-ohci.1: irq 142, io mem 0xfeaffc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
STMicroelectronics - Coprocessors st231 Init
st-coprocessor-0: No RAM reserved
st231.0 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
st-coprocessor-1: No RAM reserved
st231.1 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
stm_rng hardware driver 1.0 configured
stlpc device driver registered
heartbeat: version 0.1.1 loaded
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 13kernel.panic = 5
sttbx_early_core: module license 'ST Microelectronics' taints kernel.
Load module sttbx_early_core
* Looking for chipset model and version...
Load module stos_core [?]               by insmod (pid 338)
Load module stsys_ioctl [252]           by insmod (pid 341)
  STx7105 D detected (32BITS)
* Loading companions
LXLOAD(video1)  : LX loaded => Base=0x40000000 - Last=0x4015eb24 - Size=1436452
LXLOAD(audio1)  : LX loaded => Base=0x40400000 - Last=0x405c3734 - Size=1849140
sttbx_early_core: Exiting kernel Module
* Inserting Multicom
ybsICS init 1 debug_flags 0x40 debug_chan 0x5 connect 0 watchdog 0 bpa2_part 'bigphysarea'
parseRegionString bigphysarea,0x40000000:0x10000000
token1 bigphysarea
token2 bigphysarea
LINUX_VERSION_CODE < KERNEL_VERSION
region[0] base 0x40d0b000 size 0x7d0000
token1 0x40000000
token2
region[1] base 0x40000000 size 0x10000000
ICS: Using BPA2 partition 'bigphysarea'
Calling ICS_cpu_init(0, 0x7, 0x0)
ICS Adding region[0] 0x40d0b000 0x7d0000
ICS Adding region[1] 0x40000000 0x10000000
EMBX init debug_flags 0x0 debug_chan 0x5
MME module init=1 debug_flags=0x0 pool_size=524288
* Inserting STAPI Module
Load module sttbx_early_core
Load module stevt_core [?]              by insmod (pid 433)
Load module stcommon_core [?]           by insmod (pid 433)
Load module sttbx_core [?]              by insmod (pid 433)
Load module stclock_core [250]          by insmod (pid 433)
Load module stclkrv_core [?]            by insmod (pid 433)
Load module stpower_core [249]          by insmod (pid 433)
Load module stfdma_core [248]           by insmod (pid 433)
Load module stmerge_core [?]            by insmod (pid 433)
Load module stavmem_core [?]            by insmod (pid 433)
Load module stbuffer_core [?]           by insmod (pid 433)
Load module stinject_core [?]           by insmod (pid 433)
Load module stpio_core [?]              by insmod (pid 433)
Load module stdenc_core [?]             by insmod (pid 433)
Load module stlayer_core [?]            by insmod (pid 433)
Load module stvout_core [?]             by insmod (pid 433)
Load module stvtg_core [?]              by insmod (pid 433)
Load module stvid_core [?]              by insmod (pid 433)
Load module stvin_core [?]              by insmod (pid 433)
Load module stos_core [?]               by insmod (pid 433)
Load module stvmix_core [?]             by insmod (pid 433)
Load module stgxobj_core [?]            by insmod (pid 433)
Load module staudlx_core [246]          by insmod (pid 433)
Load module stcc_core [?]               by insmod (pid 433)
Load module stttx_core [?]              by insmod (pid 433)
Load module stvbi_core [?]              by insmod (pid 433)
Load module stblit_core [?]             by insmod (pid 433)
Load module stsmart_core [243]          by insmod (pid 433)
Load module stnet_core [?]              by insmod (pid 433)
Load module stsp_core [?]               by insmod (pid 433)
Load module stpti4_core [?]             by insmod (pid 433)
Load module stevt_ioctl [242]           by insmod (pid 439)
Load module stcommon_ioctl [241]        by insmod (pid 439)
Load module sttbx_ioctl [240]           by insmod (pid 439)
Load module stclkrv_ioctl [239]         by insmod (pid 439)
Load module stpower_ioctl [238]         by insmod (pid 439)
Load module stfdma_ioctl [237]          by insmod (pid 439)
Load module stmerge_ioctl [235]         by insmod (pid 439)
Load module stavmem_ioctl [234]         by insmod (pid 439)
Load module stbuffer_ioctl [233]        by insmod (pid 439)
Load module stinject_ioctl [232]        by insmod (pid 439)
Load module stspi_ioctl [230]           by insmod (pid 439)
Load module stpio_ioctl [229]           by insmod (pid 439)
Load module stdenc_ioctl [227]          by insmod (pid 439)
Load module stlayer_ioctl [226]         by insmod (pid 439)
Load module stvout_ioctl [225]          by insmod (pid 439)
Load module stvtg_ioctl [224]           by insmod (pid 439)
Load module stvid_ioctl [223]           by insmod (pid 439)
Load module stvin_ioctl [222]           by insmod (pid 439)
Load module stvmix_ioctl [221]          by insmod (pid 439)
Load module stgxobj_ioctl [220]         by insmod (pid 439)
Load module stcc_ioctl [218]            by insmod (pid 439)
Load module stttx_ioctl [217]           by insmod (pid 439)
Load module stvbi_ioctl [216]           by insmod (pid 439)
Load module stblit_ioctl [215]          by insmod (pid 439)
Load module stsys_ioctl [209]           by insmod (pid 439)
Load module stnet_ioctl [208]           by insmod (pid 439)
Load module stpti4_ioctl [207]          by insmod (pid 439)
* Creating device nodes in /dev/stapi
Select_table...
Loading Parameters...
##########source 0.
 board type = 1
store decoder num 1.
store pmt pid 42.
Loading Parameters end

===================================================
    SDK - Software development kit debug environment
    PLATFORM : sdk7105_7105
    OS       : LINUX - 2.6.23.17_stm23_A26-pdk7105
    VERSION  : Nov  7 2017 at 14:46:06
===================================================

STAPI_SDK Revision : STAPI_SDK-REL_34.1
ims flag 1
crontab: can't open '/root/root': No such file or directory
crontab: user root cannot read /root/root
socket function!!
Create socket.
bind address to socket.
stmmac_timer: TMU2 Timer ON (freq 256Hz)
route: SIOCADDRT: Network is unreachable
Creat Message queue success, 0
Creat Message queue success, 32769
send message success, 0, 1
send message success, 0, 58
send message success, 0, 59
baud 115200.
open ttyAS1 ok
WebMsg Queue: id = 112
=====sendHdms hdms_para.devicetype=1
555555555555555555555555555555555555555555555
hdms_para.device_type=1
WebMsg Queue: id = 100
dmm1701im system
dmm1701im status
dmm1701im config
dmm1701im network
snmpd:Creat trap Message queue failure, -1
snmpd:Recreat trap Message queue Ok, 32769
***********trap recv: trap_index=1    cleared_flag=0
**************************trap recv: trap_index=58    cleared_flag=0
**************************trap recv: trap_index=59    cleared_flag=0
First loop
Second loop
▒dNt://192.168.0.80:12345name = IPK:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
0, param = ▒dNt://192.168.0.80:12345, mode = rd4
[0x6ad011f5] : TCPIP_OpenStream(IP0):**ERROR** !!! Invalid stream protocole !!!
main task start...
Decoder_Monitor_task start.....

Please press a key...
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
Cannot open file "macros.ttm" for input
ST7105 > [1~K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
K:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c
stopK:STNET_GetStatistics()::ERROR: "!!! Error BAD_PARAMETER " on line 714 in /home/hw/workspace/sdk_a34/stapisdk/apilib/src/stnet/linux/stnet_core/../../src/stnet.c

 

====================

Основная грабля, на которую я наступил - любая команда в консоли, даже если сыпятся куча ошибок (как выше), выполнима, главное условие писать так:

#shell "команда"

====================

Вписав команду #shell "ifconfig" я увидел IP-адрес, который присвоила неудачная прошивка сетевому интерфейсу, он был не стандартным 10.10.70.48, а 192.168.0.78, хотя в логах 192.168.0.80  (это как раз была попытка прошивкой присвоить несуществующему второму сетевому интерфейсу IP-адрес). Скопировал прошивку http://data.nag.ru/PBI/Software/1701xx/1701PM002F.rar предварительно распаковав и загрузил в папку pub файл target.tgz в папку pub, выполнил в консоли команду #shell "upgrade", устройство перезагрузилось, но стало 1701IM с двумя сетевыми интерфейсами, а в 1701PM-04C только TCP-control. Сделал нижеследующее.

В итоге скопировав с работающего модулятора 1701PM-04C командой #shell "cp /root/pbiinit.db /var/ftp/pub" файл стал доступен для скачивания по FTP в проводнике на рабочий стол с именем pbiinit.db, который находился в /root, после этот файл по фтп скопировать в папку pub, откуда его через терминал уже переместил командой #shell "cp /var/ftp/pub/pbiinit.db /root/" Вы всегда можете посмотреть какие папки и файлы на сервере командой #shell "ls /путь_к_папке_с_файлами". Выполнив команду #shell "reboot" устройство перезагрузилось и применило нужные параметры. После я зашёл на устройство через браузер в Systems и выполнил upgrade до последней версии прошивки http://data.nag.ru/PBI/Software/1701IM/17xx004a.rar

 

Прикрепляю рабочий pbiinit.db от PBI 1701PM-04C, вдруг кому пригодится. Прикрепленный файл logs.txt - так выглядит лог в консоли по RS-232 на неработающем pbi 1701pm-04c.

 

pbi-1701pm-04c.jpg

___________________________

P.S. подключаться на J500 разъём на плате в PBI!

Вот фотография подключения

logs.txt

pbiinit.db

com.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×