The process starts from Astra linux console and a description of the startup parameters

    This mode is necessary to find errors (for example, if the Astra process stops working for some reason.)

    The simplest command for start the Astra:

    astra -c /etc/astra/astra.conf -p 8000
    

    notes:
    astra - name of binary (executable) file
    -c - path to configuration file
    -p - the port for the web interface

    Additional launch options:

    --no-stdout - Disabling information message output to console
    --no-info - Disable informational messages
    --debug - Enable debug mode
    --log FILE - logging to file (full path to log file) --syslog name - send messages to syslog, where name is the name of the application. (you can set any for easy identification)
    --pid FILE - Full path to pid file
    --daemon - Start the process in daemon mode
    --no-web-auth - To disable authentication for the web interface
    --reset-password - Password reset (for more information, see the Reset password) --slave - Starting in master/slave mode (detailed information in the menu section Failover configuration )

    Additional application:

    --relay - Relay mode (detailed information in the menu section relay)
    --analyze - MPEG-TS analyzer. (detailed information in the menu section analyzer)
    --femon - The status of the DVB adapters
    --dvbls - Displays a list of DVB adapters with information about them

    Examples:

    launch of Astra:
    astra -c /etc/astra/astra.conf -p 8000 --pid /var/run/astra.pid --log /var/log/astra.log --daemon
    

    This command will start the process astra with the configuration file /etc/astra/astra.conf, web interface on port 8000 - pid-file /var/run/astra.pid and sending the log to file /var/log/astra.log in daemon mode

    Displays a list of dvb adapters
    astra --dvbls
    Apr 02 17:31:24: INFO: [main] Starting Astra
    Apr 02 17:31:25: INFO: adapter = 3, device = 0
    Apr 02 17:31:25: INFO:     mac = 00:17:42:54:09:53
    Apr 02 17:31:25: INFO:     frontend = Montage DS3103/TS2022
    Apr 02 17:31:25: INFO:     type = S
    Apr 02 17:31:25: INFO: adapter = 2, device = 0
    Apr 02 17:31:25: INFO:     mac = 00:17:42:54:09:52
    Apr 02 17:31:25: INFO:     frontend = Montage DS3103/TS2022
    Apr 02 17:31:25: INFO:     type = S
    Apr 02 17:31:25: INFO: adapter = 1, device = 0
    Apr 02 17:31:25: INFO:     mac = 00:17:42:54:09:53
    Apr 02 17:31:25: INFO:     frontend = Montage DS3103/TS2022
    Apr 02 17:31:25: INFO:     type = S
    Apr 02 17:31:25: WARNING: adapter = 0, device = 0
    Apr 02 17:31:25: WARNING:     adapter in use
    Apr 02 17:31:25: WARNING:     mac = 00:17:42:54:09:52
    Apr 02 17:31:25: WARNING:     frontend = Montage DS3103/TS2022
    Apr 02 17:31:25: WARNING:     type = S
    

    From this data we can see that we have on the server 4 adapter Montage DS3103, and one of them (warning status) - is used.